News News

Water-based epoxy floor paint and other standards in April 2017 from the implementation

Date: 2017-01-02
Browsing times: 6
Share to:

According to statistics, chemical industry standards, including water-based epoxy floor coatings, rail vehicles, water-based damping paint, offshore oil platform with anti-corrosion coatings, liquefied natural gas (LNG) storage tank anti-corrosion coatings, automotive repair coating, silver mirror Mirror back with paint and other coatings industry standards in the column, will be April 1, 2017 from the implementation. Details are as follows:

HG / T5057-2016 Waterborne Epoxy Floor Coating

This standard specifies the requirements of waterborne epoxy floor coatings, test methods, inspection rules and signs, packaging and storage and so on.

This standard applies to water as the main dispersion medium epoxy floor coating, the product coating in the cement mortar, concrete, stone and other ground substrate, from the protection, decoration and so on.

Water - borne damping coatings for railway traffic vehicles GB / T

This standard specifies the scope, terms and definitions, requirements, test methods, inspection rules, marking, packaging and storage of waterborne damping coatings for rail vehicles.

This standard applies to water-based paints applied to the surface of metro, light rail, tram, ordinary trains and high-speed trains and other rail vehicles, the coating has to reduce vibration, noise and other damping functions. Automotive, construction machinery and other vehicles with damping paint can also refer to this standard.

Anticorrosive Coatings for Offshore Petroleum Platforms (HG / T5059-2016)

This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging and storage of anti-corrosion coatings for offshore oil platforms.

This standard applies to the offshore oil platform on the platform structure of the new anti-corrosion protection of the coating.

The offshore oil platforms referred to in this standard include stationary platforms, tension leg platforms, semi-submersible platforms and deep-water float platforms, and do not include floating production oil storage units (FPSO).

Anticorrosive paints for liquefied natural gas (LNG) storage tanks HG / T

This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging and storage of anticorrosive coatings for liquefied natural gas storage tanks.

This standard is applicable to the protection and decorative coatings of fixed LNG storage tanks such as shore-based liquefied natural gas storage tanks, urban natural gas peak-shaking station storage tanks and gas-field liquefied gas storage tanks.

Paints for automobile repair. HG / T5061-2016

This standard specifies the terms and definitions, product classification, requirements, test methods, inspection rules and signs, packaging and storage of automotive repair coating products.

This standard applies to passenger cars, commercial vehicles, trailers, car trains and other automotive exterior surface decoration and protection from the repair coating.

This standard applies to solvent-based and water-based car repair coating. This standard does not apply to automotive interior coatings and special functional coatings.

HG / T5062-2016 silver mirror with the back paint

This standard specifies the terminology and definitions, classification, requirements, test methods, inspection rules, marking, packaging and storage of silver mirror back products.

This standard applies to the indoor copper and copper-free silver-plated glass mirror on the back of the decorative coating and protection with one-component curing curing paint.

Hardener for solvent - borne polyurethane wood coatings. HG / T5063-2016

This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging and storage of the curing agent for solvent-borne polyurethane wood coatings. This standard applies to the use of diisocyanate monomers such as tolylene diisocyanate (TDI), hexamethylene diisocyanate (HDI), isophorone diisocyanate (IPDI), diphenylmethane diisocyanate (MDI) (NCO) -containing compound, which is dissolved in organic solvent in a certain proportion, is used as a curing agent for various solvent-borne polyurethane wood coatings.

Flexible protective coating for bridge cable

This standard specifies the requirements, test methods, inspection rules, marking, packaging and storage of flexible protective coatings for wire ropes of bridges.

This standard applies to the outer surface of the bridge wire wrapped around the wire, non-slip pedestrian access to the structure of the outer surface of the flexible protective coatings.

Glazing varnishes for architectural coatings HG / T5065-2016

This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging and storage of varnish for architectural coatings.

This standard applies to the acrylic resin, silicone-modified acrylic resin, polyurethane resin as the main film-forming material, adding additives, water or solvent prepared from the varnish. The product is mainly used in the interior and exterior wall paint surface, can improve the coating system of decorative and protective.

HG / T5066-2016 Dispersant for waterborne coatings

This standard specifies the classification, technical requirements, test methods, inspection rules and labeling, packaging, transport and storage of polycarboxylates such as polyacrylates and their modified polymeric dispersants.

This standard applies to polyacrylic acid salts such as polycarboxylates and modified products synthesized by the polymer dispersant, the product is mainly used for water-based paint pigment and pigment dispersion and stability can also be used for color paste In the pigment dispersion and stability.

This standard does not apply to waterborne paints and dispersions for colorants containing nano-pigments and high-pigmented carbon blacks, nor to solid dispersions for aqueous coatings.

Waterborne Alkyd Resin for Coatings

This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging and storage of water-borne alkyds for paints.

This standard applies to water-borne alkyd resins for paints made by polycondensation of polybasic acids and fatty acids (or oils) with polyols.

This standard also applies to waterborne alkyds for paints modified for specific performance. Typical modifiers include rosin, phenolic resin, styrene, isocyanate, polyamide, acrylic, epoxy or organosilicon compounds. .

HG / T5068-2016 Antirust paint with phosphor powder for coating

This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of anti-rust pigments for phosphoric iron powder for coating.

This standard applies to iron and phosphorus powder after processing into powder. Products are mainly used for conductive coatings, high temperature coatings, anti-corrosion coatings and other coatings, from the enhanced role of anti-rust coating performance.

HG / T5069-2016 transparent iron oxide pigments

This standard specifies the product classification, requirements, sampling, test methods, inspection rules and marks, packaging, transportation and storage of transparent iron oxide pigment products.

This standard applies to iron oxide pigments which are transparent in the application process. Products used in automotive coatings, wood coatings, electrophoretic coatings, can coatings and other fields.

Aluminum pigments for paints - Part 2: Aluminum powder

This part of the provisions of the aluminum powder product classification, requirements, sampling, test methods, inspection rules and signs, packaging, storage and so on.

This section applies to the use of atomized aluminum powder, surface treatment agent and organic solvents by wet ball milling, drying and other processes to produce aluminum powder. Products are mainly used for coatings, inks and plastics, and other fields.

Aluminum pigments for paints - Part 5: Water - borne aluminum pastes GB / T

This section specifies the requirements, sampling, test methods, inspection rules and signs, packaging, storage, etc. of waterborne aluminum pastes.

This section applies to the use of atomized aluminum powder, surface treatment agent and organic solvents in the wet ball mill, and then by the silicon compound coating or inhibitor passivation treatment, the formation of aluminum particles in the surface layer of protective layer to prevent Aluminum flakes react with aluminum foils. Products are mainly used for water-based paint areas.


News / Recommended news More
2017 - 01 - 12
Shanghai Milestone Construction Material Co., Ltd. won the honor of Sika "Top Ten Contractors of Sika Floor in 2015"
2017 - 01 - 12
Congratulations to Shanghai Milestone Construction Material Co., Ltd. on a professional construction technology to Jiangsu Hengrui Pharmaceutical Co., Ltd. project, won the Sika pharmaceutical industry, "2015 National Best Project" honor.
Add: No. 1428, Putuo District South Road, Shanghai, building 9, 304A
Tel:021-56531386 
Fax:021-56531578
Code:200331
  • Browse mobile terminal
  • WeChat browser
Copyright ©2005 - 2013Shanghai Mai Road Building Materials Co Ltd.
犀牛云提供企业云服务
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

5

电话号码管理

  • 021-56531386
6

二维码管理

Open